Troubleshooting; Chapter 39 Troubleshooting; Power, Hardware Connections, And Leds - ZyXEL Communications VMG3925-B10A User Manual

This chapter offers some suggestions to solve problems you might encounter. The potential
problems are divided into the following categories.
•

Power, Hardware Connections, and LEDs

• VMG Access and Login
• Internet Access
• Wireless Internet Access
• USB Device Connection
• UPnP
39.1 Power, Hardware Connections, and LEDs
The VMG does not turn on. None of the LEDs turn on.
Make sure the VMG is turned on.
1
Make sure you are using the power adaptor or cord included with the VMG.
2
Make sure the power adaptor or cord is connected to the VMG and plugged in to an appropriate
3
power source. Make sure the power source is turned on.
Turn the VMG off and on.
4
If the problem continues, contact the vendor.
5
One of the LEDs does not behave as expected.
Make sure you understand the normal behavior of the LED. See
1
Check the hardware connections.
2
Inspect your cables for damage. Contact the vendor to replace any damaged cables.
3
Turn the VMG off and on.
4
C
HAPTER
VMG3925-B10A User's Guide
258

Troubleshooting

Section 1.5 on page
3 9
17.