ZyXEL Communications VMG3925-B10A User Manual page 90

password in order to validate the connection. This type of encryption, while robust, is not as strong
as WPA, WPA2 or even WPA2-PSK. The WPA2-PSK security mode is a newer, more robust version of
the WPA encryption standard. It offers slightly better security, although the use of PSK makes it
less robust than it could be.
Click Network Setting > Wireless to display the General screen.
Note: WPA-PSK or WPA-WPA2-Personal is not available if you enable WPS before you
configure them.
Figure 32 Wireless > General: More Secure: WPA(2)-PSK
The following table describes the labels in this screen.
Table 19 Wireless > General: More Secure: WPA(2)-PSK
LABEL DESCRIPTION
Security Level Select More Secure to enable WPA(2)-PSK data encryption.
Security Mode Select WPA-PSK, WPA2-PSK or WPA-WPA2-Personal from the drop-down list box.
Generate Select this option to have the VMG automatically generate a password. The password field
password will not be configurable when you select this option.
automatically
Password The encryption mechanisms used for WPA(2) and WPA(2)-PSK are the same. The only
difference between the two is that WPA(2)-PSK uses a simple common password, instead of
user-specific credentials.
If you did not select Generate password automatically, you can manually type a pre-
shared key from 8 to 64 case-sensitive keyboard characters.
more.../hide Click more... to show more fields in this section. Click hide to hide them.
password Select password unmask to show your entered password in plain text.
unmask
Encryption Select the encryption type (TKIP, AES or TKIP+AES) for data encryption.
Select TKIP if your wireless clients can all use TKIP.
Select AES if your wireless clients can all use AES.
Select TKIP+AES to allow the wireless clients to use either TKIP or AES.
Group Key The Group Key Update Timer is the rate at which the RADIUS server sends a new group
Update Timer key out to all clients.
Chapter 7 Wireless
VMG3925-B10A User's Guide
90