The Dynamic Dns Screen - ZyXEL Communications VMG3925-B10A User Manual

The following table describes the labels in this screen.
Table 70 DNS Entry: Add/Edit
LABEL
Host Name
IPv4 Address
OK
Cancel

12.3 The Dynamic DNS Screen

Use this screen to change your VMG's DDNS. Click Network Setting > DNS > Dynamic DNS. The
screen appears as shown.
Figure 94 Network Setting > DNS > Dynamic DNS
The following table describes the fields in this screen.
Table 71 Network Setting > DNS > > Dynamic DNS
LABEL
Dynamic DNS Setup
Dynamic DNS
Service Provider
Host Name
Username
Password
Dynamic DNS Status
User
Authentication
Result
Last Updated
Time
Current Dynamic
IP
Chapter 12 DNS Setup
DESCRIPTION
Enter the host name of the DNS entry.
Enter the IP address of the DNS entry.
Click OK to save your changes.
Click Cancel to exit this screen without saving.
DESCRIPTION
Select Enable to use dynamic DNS.
Select your Dynamic DNS service provider from the drop-down list box.
Type the domain name assigned to your VMG by your Dynamic DNS provider.
You can specify up to two host names in the field separated by a comma (",").
Type your user name.
Type the password assigned to you.
This shows Success if the account is correctly set up with the Dynamic DNS provider
account.
This shows the last time the IP address the Dynamic DNS provider has associated with
the hostname was updated.
This shows the IP address your Dynamic DNS provider has currently associated with
the hostname.
VMG3925-B10A User's Guide
175