Network Address Translation (Nat); Overview; What You Can Do In This Chapter; What You Need To Know - ZyXEL Communications VMG3925-B10A User Manual

Network Address Translation (NAT)

11.1 Overview

This chapter discusses how to configure NAT on the VMG. NAT (Network Address Translation - NAT,
RFC 1631) is the translation of the IP address of a host in a packet, for example, the source address
of an outgoing packet, used within one network to a different IP address known within another
network.

11.1.1 What You Can Do in this Chapter

• Use the Port Forwarding screen to configure forward incoming service requests to the server(s)
on your local network
• Use the Applications screen to forward incoming service requests to the server(s) on your local
network (Section 11.3 on page
• Use the Port Triggering screen to add and configure the VMG's trigger port settings
11.4 on page
• Use the DMZ screen to configure a default server
• Use the ALG screen to enable and disable the NAT and SIP (VoIP) ALG in the VMG
on page 166).
• Use the Address Mapping screen to configure the VMG's address mapping settings
11.7 on page
• Use the Sessions screen to configure the VMG's maximum number of NAT sessions
11.7 on page

11.1.2 What You Need To Know

Inside/Outside
Inside/outside denotes where a host is located relative to the VMG, for example, the computers of
your subscribers are the inside hosts, while the web servers on the Internet are the outside hosts.
Global/Local
Global/local denotes the IP address of a host in a packet as the packet traverses a router, for
example, the local address refers to the IP address of a host when the packet is in the local
network, while the global address refers to the IP address of the host when the same packet is
traveling in the WAN side.
(Section 11.2 on page
161).
162).
166).
166).
VMG3925-B10A User's Guide
157
C
HAPTER
158).
(Section 11.5 on page
11
(Section
165).
(Section 11.6
(Section
(Section