The System Log Screen; The Security Log Screen - ZyXEL Communications VMG3925-B10A User Manual

Table 98 Syslog Severity Levels
CODE
5
6
7

22.2 The System Log Screen

Use the System Log screen to see the system logs. Click System Monitor > Log to open the
System Log screen.
Figure 128 System Monitor > Log > System Log
The following table describes the fields in this screen.
Table 99 System Monitor > Log > System Log
LABEL
Level
Category
Clear Log
Refresh
Export Log
Email Log Now
#
Time
Facility
Level
Category
Messages

22.3 The Security Log Screen

Use the Security Log screen to see the security-related logs for the categories that you select.
Click System Monitor > Log > Security Log to open the following screen.
Chapter 22 Log
SEVERITY
Notice: There is a normal but significant condition on the system.
Informational: The syslog contains an informational message.
Debug: The message is intended for debug-level purposes.
DESCRIPTION
Select a severity level from the drop-down list box. This filters search results according to
the severity level you have selected. When you select a severity, the VMG searches through
all logs of that severity or higher.
Select the type of logs to display.
Click this to delete all the logs.
Click this to renew the log screen.
Click this to export the selected log(s).
Click this to send the log file(s) to the E-mail address you specify in the Maintenance >
Logs Setting screen.
This field is a sequential value and is not associated with a specific entry.
This field displays the time the log was recorded.
The log facility allows you to send logs to different files in the syslog server. Refer to the
documentation of your syslog program for more details.
This field displays the severity level of the log that the device is to send to this syslog server.
This field displays the type of the log.
This field states the reason for the log.
VMG3925-B10A User's Guide
216