Roll X Jam (X Is 1 (Upper) Or 2 (Lower)); Paper Loaded Askew - Canon iPF850 series Basic Manual

iPF850 Series
"Manually rewind the roll all the way and press OK."
Cause
A paper jam occurred
when advancing the pa-
per.
"Lift the release lever and remove the paper."
Cause
A paper jam occurred in the printer during printing.

Roll x jam (x is 1 (Upper) or 2 (Lower))

Roll x jam (x is 1 (Upper) or 2 (Lower))
"Lift the release lever."
Cause
A paper jam occurred
in the printer during
printing.
"Manually rewind the roll all the way and press OK."
Cause
A paper jam occurred
when advancing the pa-
per.

Paper loaded askew.

Paper loaded askew.
Paper loaded crooked was detected when the paper was advanced.
Basic Guide
1.
Rewind paper on the Roll Holder manually, all the way, and then press the OK button.
2.
If "Not finished printing. Finish printing remaining jobs?" is shown on the Display Screen, press
the OK button.
Printing will resume, starting from the page on which the error occurred.
Lift the Release Lever and remove the jammed paper.
(See "Clearing Jammed Roll Paper.")
(See "Clearing a Jammed Sheet.")
1.
Lift the Release Lever and remove the jammed paper.
(See "Clearing Jammed Roll Paper.")
(See "Clearing a Jammed Sheet.")
2.
If "Not finished printing. Finish printing remaining jobs?" is shown on the Display Screen, press the
OK button.
Printing will resume, starting from the page on which the error occurred.
1.
Rewind paper on the Roll Holder manually, all the way, and then press the OK button.
2.
If "Not finished printing. Finish printing remaining jobs?" is shown on the Display Screen, press
the OK button.
Printing will resume, starting from the page on which the error occurred.
Cause
Corrective Action
Corrective Action
P.111
➔
P.114
➔
Corrective Action
P.111
➔
P.114
➔
Corrective Action
Lift up the Release Lever and reload the
paper.
(See "Loading Rolls in the Print-
er.") P.15
➔
(See "Loading Sheets in the Print-
er.") P.25
➔
If this error recurs after you reload the roll,
remove the Roll Holder from the printer,
push the roll firmly in until it touches the
Roll Holder flange, and reload the Roll
Holder in the printer.
(See "Attaching the Roll Holder to
Rolls.")
➔
Roll x jam (x is 1 (Upper) or 2 (Lower))
Corrective Action
P.12
147