Change A Static Route - NETGEAR D7000 User Manual

Nighthawk AC1900 WiFi VDSL/ADSL Modem Router Model D7000
Field
Gateway IP Address
Metric
9. Click the Apply button.
Your settings are saved. The static route is added to the table on the Static Routes page.

Change a Static Route

You can change an existing static route.
To change a static route:
1. Launch a web browser from a computer or WiFi device that is connected to the network.
2. Enter http://www.routerlogin.net.
A login window opens.
3. Enter the modem router user name and password.
The user name is admin. The default password is password. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > Advanced Setup > Static Routes.
The Static Routes page displays.
5. In the Static Routes table, select the radio button to the left of the route.
6. Click the Edit button.
The page adjusts.
7. Change the settings for the route.
For more information about the settings, see
8. Click the Apply button.
The route is updated in the table on the Static Routes page.
Description
Enter the IP address of the gateway.
The IP address of the gateway must be on the same LAN segment as the modem router.
Enter a number from 1 through 15.
This value represents the number of routers between your network and the destination. Usually,
a setting of 2 or 3 works, but if this is a direct connection, set it to 1.
Set Up a Static Route
Manage the WAN and LAN Network Settings
216
on page 214.