Manage The Router Information Protocol Settings - NETGEAR D7000 User Manual

Nighthawk AC1900 WiFi VDSL/ADSL Modem Router Model D7000
4. Select ADVANCED > Setup > LAN Setup.
5. In the IP Address field, enter the LAN IP address for the modem router.
6. In the IP Subnet Mask, enter the LAN subnet mask for the modem router.
7. Click the Apply button.
Your settings are saved.
If you changed the LAN IP address of the modem router, you are disconnected when the changes take effect.
To reconnect, close your browser, relaunch it, and log in to the modem router at its new LAN IP address.

Manage the Router Information Protocol Settings

Router Information Protocol (RIP) lets the modem router exchange routing information with other routers. By default,
RIP is enabled in both directions (in and out) without a particular RIP version.
To manage the RIP settings:
1. Launch a web browser from a computer or WiFi device that is connected to the network.
2. Enter http://www.routerlogin.net.
A login window opens.
3. Enter the modem router user name and password.
The user name is admin. The default password is password. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > Setup > LAN Setup.
Manage the WAN and LAN Network Settings
208