Table of Contents
Advertisement
The user name is admin. The password is the one that you specified the first time that you logged in.
The user name and password are case-sensitive.
The BASIC Home page displays.
4.
Select ADVANCED > Setup > LAN Setup.
The LAN Setup page displays.
5.
Select the radio button next to the reserved address.
6.
Click the Delete button.
The address is removed.
Custom Static Routes
Typically, you do not need to add static routes unless you use multiple cable modem routers or multiple IP
subnets on your network.
As an example of when a static route is needed, consider the following case:
•
Your main Internet access is through a cable modem to an ISP.
•
Your home network includes an ISDN cable modem router for connecting to the company where you
are employed. This cable modem router's address on your LAN is 192.168.1.100.
•
Your company's network address is 134.177.0.0.
When you set up your cable modem router, two implicit static routes were created. A default route was
created with your ISP as the gateway, and a second static route was created to your local network for all
192.168.1.x addresses. With this configuration, if you try to access a device on the 134.177.0.0 network,
your cable modem router forwards your request to the ISP. The ISP forwards your request to the company
where you are employed, and the company firewall is likely to deny the request.
In this case you must define a static route, telling your cable modem router to access 134.177.0.0 through
the ISDN cable modem router at 192.168.1.100. Here is an example:
•
The Destination IP Address and IP Subnet Mask fields specify that this static route applies to all
134.177.x.x addresses.
•
The Gateway IP Address field specifies that all traffic for these addresses will be forwarded to the ISDN
cable modem router at 192.168.1.100.
•
A metric value of 1 works because the ISDN cable modem router is on the LAN.
•
The Private check box is selected only as a precautionary security measure in case RIP is activated.
Set Up a Static Route
To set up a static route:
1.
Launch a web browser from a computer or mobile device that is connected to your Orbi network.
2.
Enter orbilogin.com.
A login window opens.
Orbi WiFi System
Specify Network Settings
48
Hide quick links:
Advertisement
Table of Contents
