NETGEAR D7000 User Manual page 212

Nighthawk AC1900 WiFi VDSL/ADSL Modem Router Model D7000
A login window opens.
3. Enter the modem router user name and password.
The user name is admin. The default password is password. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > Setup > LAN Setup.
5. Make sure that the Use Router as DHCP Server check box is selected.
This check box is selected by default.
6. Specify the range of IP addresses that the modem router assigns:
• In the Single/Start IP Address field, enter the lowest number in the range.
This IP address must be in the same subnet as the modem router. By default, the starting IP address is
192.168.0.2.
• In the Finish IP Address field, enter the number at the end of the range of IP addresses.
This IP address must be in the same subnet as the modem router. By default, the ending IP address is
192.168.0.254.
7. Click the Apply button.
Your settings are saved.
Manage the WAN and LAN Network Settings
212