NETGEAR D7000 User Manual page 14

Nighthawk AC1900 WiFi VDSL/ADSL Modem Router Model D7000
Table 2. LED and button descriptions
LED
Power
Internet
DSL
2.4 GHz WiFi
5 GHz WiFi
Description
• Solid amber. The modem router is starting.
If the Power LED lights solid amber during any other time, a power-on self-test (POST) failure or
device malfunction occurred.
For more information, see
• Blinking amber. The modem router was reset to factory default settings and is restarting.
For more information, see
• Solid white. The modem router is ready.
• Off. Power is not supplied to the modem router.
For more information, see
• Solid white. The modem router detected an Internet connection.
• Solid amber. The modem router is not connected to a DSL, cable, or fiber modem, or the modem
router did not detect an Internet connection.
For more information, see
• Blinking white. Data is being transmitted over the Internet connection.
• Alternating white and amber. The traffic meter is enabled and the traffic limit is reached.
• Off. The modem router cannot connect to the Internet or the Internet connection failed.
For more information, see
• Solid white. The modem router is connected to a DSL service and the DSL connection is ready.
• Blinking white. The modem router is negotiating the best possible speed on the DSL line.
• Off.The modem router is not connected to a DSL service or a DSL connection is not established.
• Solid white. The 2.4 GHz WiFi radio is operating.
• Blinking white. The modem router is sending or receiving WiFi traffic over the 2.4 GHz radio.
• Off. The 2.4 GHz WiFi radio is off.
• Solid white. The 5 GHz WiFi radio is operating.
• Blinking white. The modem router is sending or receiving WiFi traffic over the 5 GHz radio.
• Off. The 5 GHz WiFi radio is off.
Hardware Overview of the Modem Router
Power LED Remains Solid Amber
Use the Reset Button on page 224.
Power LED Is Off on page 278.
Troubleshoot the Internet Connection
Internet LED Is Off on page 280.
14
on page 278.
on page 279.