NETGEAR D7000 User Manual page 58

Nighthawk AC1900 WiFi VDSL/ADSL Modem Router Model D7000
Field
Encapsulation
Login
Password
Service Name
Connection Mode
Idle Timeout (minutes)
Internet IP Address or IPTV IP Address (depending on your selection in Step 7)
Get Dynamically from ISP
Description
Select the encapsulation, as indicated by your ISP:
• PPPoE (PPP over Ethernet).Your Internet connection uses PPP over Ethernet.
• PPPoA (PPP over ATM). Your Internet connection uses PPP over ATM.
Enter the login name that you use to log in to your Internet service, as indicated by
your ISP.
This login name is often an email address.
Enter the password that you use to log in to your Internet service, as indicated by
your ISP.
Enter the service name that you use to log in to your Internet service, as indicated
by your ISP.
Often, a service name is not required.
Note This field does not display if your selection from the Encapsulation
menu is PPPoA (PPP over ATM).
Select how the Internet connection functions:
• Always On. Once the Internet connection is established, it remains active. This
is the default setting.
• Dial on Demand. When someone attempts to connect to the Internet, the
Internet connection is established. When the idle time-out period expires, the
Internet connection is terminated.
• Manually Connect. You must connect to the Internet manually (see
Establish, or Terminate the PPPoE or PPPoA Internet Connection
If you select Dial on Demand from the Connection Mode menu, enter the idle
time-out period in minutes.
The idle time-out specifies how long the modem router keeps the Internet connection
active when no one on the network is using the Internet connection. The default is
5 minutes. To disable the idle time-out, enter 0. (When you disable the idle time-out,
the connection is not terminated automatically).
Your ISP uses DHCP to assign your IP address. Your ISP automatically assigns
these addresses.
Manage the Internet Settings Manually
58
View,
on page 235).