Using the Turbo function
You can set the Turbo function to provide fast and powerful cooling (heating).
When the air conditioner is operating in Cool or Heat mode;
Remote controller display
Mirage_AP50M0@_IBIM_EN_05323A-02.indd 19
1. Press the Turbo button.
- (Turbo) will be displayed and the function will operate for 30 minutes.
f Press the Turbo Button.
Cancel
f
• Turbo function is only available in Auto/Cool/Heat* mode and the air
conditioner will return to its previous operation mode after operating for
NOTE
30 minutes in this function. (Applicable model: AP50M1✴)
• Air fl ow direction can be adjusted.
• Temperature and fan speed cannot be adjusted.
• If you select the Turbo function while Long/Single user function is on,
corresponding function will be cancelled.
• You can also turn on/off the Turbo function with the Options button.
(1) Press the Options button.
(2) Press the <, > or Options button until (Turbo) indicator starts to blink.
(3) Press the SET button to set the Turbo function.
19
2016-05-19 오후 1:27:16