Table of Contents
Advertisement
Setting the On/Off timer
You can set the air conditioner to turn on/off automatically at desired time.
Setting On timer while the air conditioner is off / Off timer while the air conditioner is on.
When the air conditioner is off ;
Remote controller display
You can select from (Auto) (Cool) (Dry) (Fan) (Heat).
You can set the temperature after selecting the operation mode.
Temperature adjustment is available when Auto/Cool/Dry /Heat mode is selected.
• After 3 seconds from the completion of the On timer setting, only (On) indicator will remain on the remote
controller display.
NOTE
• You cannot set the fan speed when setting the On timer.
• If you press the Power
Timer indicator (
indicator on the remote controller will remain on but the function will not work.
Mirage_AP50M0@_IBIM_EN_05323A-02.indd 17
1. Press the Timer button to select (On).
- (On) indicator starts to blink and you can set the time.
2. Press the < or > button to set the time.
- You can set the time in 0.5 hour unit from 0.5 ~ 3 hours and 1 hour unit from
3~24 hours.
- Time can be set from minimum 0.5 hours to maximum 24 hours.
3. Press the SET button to complete the On timer setting.
- (On) indicator and the set time of the timer will be displayed on the remote
controller display and the Timer indicator (
unit display.
- On timer setting will be cancelled if you don't press the SET button within 10
seconds after setting the time. Therefore check for the (On) indicator on the
remote controller display and the Timer indicator (
display.
Cancel
f Press the Timer button
f
the time to
f Press the Power
f
Additional options available in On timer
button on the indoor unit after setting the On timer function with the remote controller,
) on the indoor unit display will disappear and the function will be canceled. However, (On)
) will be displayed on the indoor
) on the indoor unit
Select (On)
Press the < or > button
Press the SET button.
button.
Set
17
2016-05-19 오후 1:27:15
Advertisement
Table of Contents
