Checking the remote controller
Remote controller display
Operation mode
*Heat mode is applicable to
AP50M1✴❋model only.
Set temperature or on/off set
time with the timer function
* These functions are not
Single, Heater and Purity functions are not supported by this model.
NOTE
Using the remote controller
Point the remote controller towards the remote controller receiver of the indoor unit (see page 10 to fi nd the location of
remote controller receiver).
When you properly press the button on the remote controller, you will hear ring sound from the indoor unit.
• The signal may not be received well of electronic lighting style fl uorescent lamps such as inverter fl uorescent lamps
are in the same space.
NOTE
• If other electrical products operate by the remote controller, call your nearest contact center.
12
Mirage_AP50M0@_IBIM_EN_05323A-02.indd 12
On/Off timer
supported
Remote controller
transmission
Low battery
Fan speed
Air fl ow direction
Options
2016-05-19 오후 1:27:12