Table of Contents
Advertisement
Battery changing time
When the battery is exhausted,(
batteries. The remote controller requires two 1.5V AAA type batteries.
Storing the remote controller
When you do not use the remote controller for a long time, remove the batteries from the remote
controller and store it in the remote controller holder.
Inserting the batteries
1. Open the battery cover.
f Push the (
f
) part in the direction of the arrow and lift up the cover.
2. Insert the batteries.
f Check and match the (+), (-) signs and insert them in correct position.
f
3. Close the battery cover.
f Match the cover and bottom part of the remote controller and press it until you hear click
f
sound.
Make sure that water is not allowed to enter the remote controller.
CAUTION
• There is a possibility that the air conditioner will not operate by remote controller near strong light such as a
fl uorescent lamp or neon sign. In this case, use the remote controller in front of the remote controller receiver of the
NOTE
indoor unit.
• If other electrical products are operated by the remote controller, call your nearest service center.
Mirage_AP50M0@_IBIM_EN_05323A-02.indd 13
)will be displayed in the remote controller display. When the icon appears, change the
13
2016-05-19 오후 1:27:13
Advertisement
Table of Contents
