Table of Contents
Advertisement
Installation method
Drain hose
1. Connect the drain hose by inserting the extension drain
hose to the drain connection port tightly.
2. Insulate the extension drain hose, then fix it with a cable
tie or a tape.
Piping material
Insulation
• As the draining is of natural drain type, make the drain hose direct downward.
• Fix the drain hose tightly to prevent any water leakage.
CAUTION
• If there is any foreign substance in the drain plate, it may clog the drain pipe. Therefore, be sure to remove the
foreign substance inside after installation.
• Do not extend the drain hose.
Fixing the indoor unit
f If the indoor unit is installed on unstable place, it may shake or fall down. To prevent these accidents, you must fix the top
f
of the indoor unit tightly with fixing brackets.
Wall installation
Example 1
48
Mirage_AP30M0@_IBIM_E_34518A(1).indd 48
Vinyl chloride(Inner diameter ø13mm)
Foamed polyethylene
Corner Installation
Example 2
Insulated
drain hose
Insulation
for extension
drain hose
Extension
drain hose
2012-02-01 오후 4:07:52
Advertisement
Table of Contents
