Table of Contents
Advertisement
Using advanced functions
Using the air conditioner with the control panel
You can control the air conditioner without the remote controller.
1. Press the Power
button on the indoor unit control panel.
You will hear a ringing sound and the air conditioner will operate in the most recent operation mode used or Auto mode.
To turn off the air conditioner, press the Power
2. Press the
or
button to adjust the temperature.
You can set the desired temperature between the range of 18°C~30°C in Auto/Cool/Dry mode or 16°C~30°C in Heat*
mode. (*Heat mode is applicable in AP30M1✴ model only. You cannot set the desined temperature in Fan mode)
You can increase/decrease the temperature by 1°C.
NOTE
3. Press the Fan Speed
Each time you press the Fan Speed
Medium(
) and High(
NOTE
24
Mirage_AP30M0@_IBIM_E_34518A(1).indd 24
button again.
button to adjust the fan speed.
button, the fan speed will change in order of Auto(
).
), Low(
),
2012-02-01 오후 4:07:33
Advertisement
Table of Contents
