Table of Contents
Advertisement
Operating basic function
Dry
The air conditioner in Dry mode acts like a dehumidifier by removing moisture from the indoor air. Dry mode makes the air
feel refreshing in a humid climate.
1. Turn on the air conditioner.
Press the Power
button on the remote controller.
2. Set the operation mode.
Press the Mode button on the remote controller until Dry mode
indicator appears on the remote controller display.
The air conditioner operates in Dry mode and automatically adjust
the fan speed to Auto.
Each time you press the Mode button, the mode will change
in order of Auto, Cool, Dry, Fan and Heat*. (*Heat mode is
NOTE
applicable for AP30M1✴ model only.)
3. Set the temperature.
Press the Temp + or - button on the remote controller to increase or
decrease the desired temperature.
You can set the desired temperature between the range of
18˚C~30˚C.
You can increase/decrease the temperature by 1˚C.
NOTE
• While you are using the remote controller, make sure correct indicator which matches your selection appears on the
remote controller display.
NOTE
• Air flow can be adjusted manually (see page 20 for instructions).
14
Mirage_AP30M0@_IBIM_E_34518A(1).indd 14
2012-02-01 오후 4:07:17
Advertisement
Table of Contents
