Minolta Di200 Service Manual page 89

Touch Panel
Display
Multiple-in-1 and
Booklet Copy
Zoom
Auto Panel Reset
Energy Saver
Mode
Plug-In Counter,
ID Key Reset
Auto Power Off
LCD Back-light Off Set the time it takes the LCD backlight to turn OFF after a copy cycle
20 CPM: U.S.A. and Canada Only
Setting (The default is
Select whether to enable or disable recalling a default zoom ratio for
2in1, 4in1, or Booklet Creation.
ON
Select the time it takes the Auto Panel Reset function, which resets
the panel settings when the set period of time elapses after a copy
cycle has been completed or the last key operated, to be activated.
30 sec.
3 min.
Select the time it takes the copier to enter the Energy Saver mode
after a copy cycle has been completed or the last key operated.
• Press the "Clear" key and, Use the 10-Key Pad to set the time.
Select whether or not to reset the panel automatically when the
Access Mode key is pressed (in the Copy Track mode) or the Plug-In
Counter is unplugged.
ON
Select the time it takes the Auto Shut Off function, which shuts down
the copier when the set period of time elapses after a copy cycle has
been completed or the last key operated, to be activated.
• Press the "Clear" key and, Use the 10-Key Pad to set the time.
Note:
• The option of "OFF" becomes available on the screen if "Yes" is
selected for "Disable Auto Shut off" of the "Admin. Management"
function.
15 to 240 min.
Default: 35/25 CPM (60 min.), 20 CPM (30 min.)
has been completed or the last key has been operated.
• Press the "Clear" key and, Use the 10-Key Pad to set the time.
Highlighted
1 min.
5 min.
1 to 240 min. (
15 min.
1 to 240 min. (
1 min.
S-10
).
OFF
2 min.
No Reset
)
OFF
OFF
)