Minolta Di200 Service Manual page 91

Touch Panel
Display
Intelligent Sorting
Output Tray Select the output tray for each application when the system is
"Small" Originals Select whether to enable or disable a copy cycle when it is initiated
Scanner Dry
Density (ADF only) Adjust the copy image density level when the ADF is being used.
Setting (The default is
Select whether to enable or disable the function that automatically
switches between Sort and Non-Sort according to the number of orig-
inals and the number of copy sets to be made.
Applicable when the system is equipped with a finishing option and
using an ADF or ADFR.
ON
equipped with a finishing option.
<Fax>
1
<PC Print>
1
<Copy> Displayed when a Job Tray is mounted.
1
When a Finisher is mounted: PC Print default setting "2"
with an original of a small size that is not detectable by the system
placed on the Original Glass.
ON
Default: Metric areas OFF / Inch Areas ON
Set the time-of-day to run a Scanner drying cycle.
Note:
• When entering a value for Hours and Minutes and if it is a single-
digit number, first enter a "0."
: Initial setting
Highlighted
2
2
When the standard original (text, etc.) is
used.
To give better reproduction of faint original.
S-12
).
OFF
3
3
2
OFF