Konica Minolta BIZHUB C3850 User Manual page 38

3.2 Preparation for SMB Send
4
Check the name of the user who logs in to the computer.
% The user name is required to configure folder sharing settings and specify destinations. Write down
the user name.
% For domain users, type in "set user", and check the user name.
Then, close the window.
Next, create a folder where to send the scanned original data, and start sharing.
5
From the Start menu, click [Control Panel] - [Network and Internet] - [Network and Sharing Center].
6
In [File sharing] of [Sharing and Discovery], click [Turn on file sharing].
Click [Save changes], and close the window.
7
Create a new folder in any place, and name it.
% The folder name is required to specify a destination. Write down the folder name.
% Specify the folder name using alphanumeric characters.
8
Right-click on the folder, then click [Properties].
[Scan Functions]
3
3-8