Planet wnrt-617g User Manual page 85

The page includes the following fields:
Object
Service Port
IP Address
Protocol
Status
To set up a virtual server entry:
Step 1. Click the Add New... button.
Step 2. Select the service you want to use from the Common Service Port list. If the Common
Service Port list does not have the service that you want to use, type the number of the service
port or service port range in the Service Port box.
Step 3. Type the IP Address of the computer in the IP Address box.
Step 4. Select the protocol used for this application, either TCP or UDP, or All.
Step 5. Select the Enable check box to enable the virtual server.
Step 6. Click the Save button.
Figure 5-41 Virtual Servers
The numbers of External Ports. You can type a service port or a range of
service ports (in XXX – YYY format, XXX is the start port number, YYY is
the end port number).
The IP Address of the PC providing the service application.
The protocol used for this application, either TCP, UDP, or All (all
protocols supported by the Router).
The status of this entry either Enabled or Disabled.
-74-
User's Manual of WNRT-617G
Description