Planet wnrt-617g User Manual page 42

If the wireless adapter supports Wi-Fi Protected Setup (WPS), you can establish a wireless connection
between wireless adapter and Router using either Push Button Configuration (PBC) method or PIN
method.
To build a successful connection by WPS, you should also do the corresponding
configuration of the new device for WPS function.
I. By Push Button Configuration (PBC)
If the wireless adapter supports Wi-Fi Protected Setup and the Push Button Configuration (PBC)
method, you can add it to the network by PBC with the following two methods.
Step 1: Press the WPS/Reset Button on the front panel of the Router.
Or you can keep the default WPS Status as Enabled and click the Add device button in
then the following screen will appear.
Choose Press the button of the new device in two minutes, and click Connect.
Figure 5-4 Hardware WPS/Reset Button
Figure 5-5 Software WPS/Reset Button
-31-
User's Manual of WNRT-617G
Figure 5-5,