Planet wnrt-617g User Manual page 19

LED Definition
LED Status
On
PWR
Off
On
SYS Flashing
Off
Flashing
WLAN
Off
On
LAN1-4 Flashing
Off
On
WAN
Flashing
Off
On
3G Flashing
Off
Slow Flashing
WPS On
Quick
Flashing
1. When a device has been successfully added to the network by WPS function, the
WPS LED will keep on for about 5 minutes and then turn off.
2. When pressing and holding the WPS/Reset Button for more than 5 seconds, you
will reset the router.
Figure 2-2 WNRT-617G Front Panel
Power is on.
Power is off.
The Router is initializing.
The Router is working properly.
The Router has a system error.
The Wireless function is enabled.
The Wireless function is disabled.
A device is linked to the corresponding port but there is no activity.
An active device is linked to the corresponding port.
No device is linked to the corresponding port.
A device is linked to the corresponding port but there is no activity.
An active device is linked to the corresponding port.
No device is linked to the WAN port.
The USB 3G dongle is connected.
Data is received or sent through the 3G dongle.
No device is linked to the USB port.
A wireless device is connecting to the network by WPS function. This
process will last for about 2 minutes.
A wireless device has been successfully added to the network by WPS
function. The LED will keep on for about 5 minutes.
A wireless device has failed to be added to the network by WPS
function.
-8-
User's Manual of WNRT-617G
Function