Planet wnrt-617g User Manual page 56

Wireless 3g router
Hide thumbs Also See for wnrt-617g:
Table of Contents

Advertisement

The page includes the following fields:
Object
User Name/Password
Secondary Connection
Connect on Demand
Connect Automatically
Time-based Connecting
Connect Manually
Sometimes the connection cannot be terminated although you specify a time to
Max Idle Time, since some applications are visiting the Internet continually in the
background.
If you want to do some advanced configurations, please click the Advanced button, and the page
shown in
Figure 5-17
will then appear:
Enter the User Name and Password provided by your ISP. These fields
are case-sensitive.
Disabled
Dynamic IP
Static IP
In this mode, the Internet connection can be terminated automatically
after a specified inactivity period (Max Idle Time) and be
re-established when you attempt to access the Internet again. If you
want your Internet connection to keep active all the time, please enter
"0" in the Max Idle Time field. Otherwise, enter the number of minutes
you want to have elapsed before your Internet access disconnects.
The connection can be re-established automatically when it was down.
The connection will only be established in the period from the start time
to the end time (both are in HH:MM format).
 Note:
Only when you have configured the system time on System Tools ->
Time page can the Time-based Connecting function take effect.
You can click the Connect/ Disconnect button to connect/disconnect
immediately. This mode also supports the Max Idle Time function as
Connect on Demand mode. The Internet connection can be
disconnected automatically after a specified inactivity period and
re-established when you attempt to access the Internet again.
-45-
User's Manual of WNRT-617G
Description
The Secondary Connection is disabled by
default, so there is PPPoE connection only. This
is recommended.
You can check this radio button to use Dynamic
IP as the secondary connection to connect to
the local area network provided by ISP.
You can check this radio button to use Static IP
as the secondary connection to connect to the
local area network provided by ISP.

Advertisement

Table of Contents
loading

Table of Contents