Step 5.
You will then see the
the connection type your ISP provides. Make sure the cable is plugged into the WAN port
before detection. The appropriate configuration page will be displayed when an active
Internet service is successfully detected by the Router.
If the connection type detected is PPPoE, the next screen will appear as shown in
Enter the User Name and Password provided by your ISP. These fields are case-sensitive. If
you have difficulty with this process, please contact your ISP.
If the connection type detected is Static IP, the next screen will appear as shown in
Enter the parameters in the corresponding blanks.
Figure
4-15. Select Auto-Detect, the Router will automatically detect
Figure 4-15 Quick Setup – WAN Connection Type
Figure 4-16 Quick Setup – PPPoE
User's Manual of WNRT-617G
-23-
Figure
4-16.
Figure
4-17.