Planet wnrt-617g User Manual page 68

Enable Wireless Router
Radio
Enable SSID Broadcast
If 11b only, 11g only, or 11bg mixed is selected in the Mode field, the Channel
Width selecting field will turn grey and the value will become 20M, which is unable
to be changed.
Object
Enable WDS
The page includes the following fields:
Object
SSID(to be bridged)
BSSID(to be bridged)
The wireless radio of this Router can be enabled or disabled to allow
wireless stations access.
When wireless clients survey the local area for wireless networks to
associate with, they will detect the SSID broadcast by the Router. If you
select the Enable SSID Broadcast checkbox, the Wireless Router will
broadcast its name (SSID) on the air.
Check this box to enable WDS. With this function, the Router can bridge
two or more WLANs. If this checkbox is selected, you will have to set the
following parameters as shown below. Make sure the following settings
are correct.
Figure 5-25 WDS Settings
The SSID of the AP your Router is going to connect to as a client. You
can also use the search function to select the SSID to join.
The BSSID of the AP your Router is going to connect to as a client. You
-57-
User's Manual of WNRT-617G
Description
Description