System Routing Table - Planet wnrt-617g User Manual

Step 2. Enter the following data:
Object
Destination IP Address
Subnet Mask
Gateway
Status
Step 3. Click the Save button to make the entry take effect.
Other configurations for the entries:
Click the Delete button to delete the entry.
Click the Enable All button to enable all the entries.
Click the Disable All button to disable all the entries.
Click the Delete All button to delete all the entries.
Click the Previous button to view the information in the previous screen, click the Next button to view
the information in the next screen.

5.12.2 System Routing Table

Choose menu "System Routing Table", and you can check all of the valid route entries in use. The
Destination IP address, Subnet Mask, Gateway, and Interface will be displayed for each entry. Click
the Refresh button to refresh the data displayed.
The Destination IP Address is the address of the network or host that
you want to assign to a static route.
The Subnet Mask determines which portion of an IP Address is the
network portion, and which portion is the host portion.
This is the IP Address of the gateway device that allows for contact
between the Router and the network or host.
Select Enabled or Disabled for this entry on the Status pull-down list.
-104-
User's Manual of WNRT-617G
Description