Planet wnrt-617g User Manual page 44

Step 3: For the configuration of the wireless adapter, please choose the option that you want to
enter PIN into the Router in the configuration utility of the WPS, and click Next.
Method Two: Enter the PIN of the Router into the configuration utility of your Wireless adapter
Step 1: Get the Current PIN code of the Router in
Step 2: For the configuration of the wireless adapter, please choose the option that you want to
enter the PIN of the Router in the configuration utility of the Wireless adapter, and enter it
into the field. Then click Next.
The default PIN code of the Router can be found in WPS configuration screen as
shown in
Step 3. You will see the following screen when the new device has successfully connected to the
network.
1)
The WPS LED on the Router will light up in green for about 5 minutes if the device
has been successfully added to the network.
2) The WPS function cannot be configured if the Wireless Function of the Router is
disabled. Please make sure the Wireless Function is enabled before configuring
the WPS.
Figure 5-3.
Figure 5-7 New device connected successfully
User's Manual of WNRT-617G
Figure 5-3 (each Router has its unique PIN code).
-33-