Setting up Your System
Automatic Channel Search for Television Services(1st Step)
You can automatically detect and save all channels as follows:
System Connection
Power On
Manual Channel Search
You can automatically search and save all channels as follows :
Main Menu/Installation
Channel Search / Manual
DV-B400
• Connect STB as per pages 10 to 12 (as applicable).
• Turn on the power of STB and other devices
connected to the STB.
• Select Channel Search in the Installation Menu.
• Enter the PIN Code. (Factory PIN Code is '0000')
• Press RED (SUB.T) button and the STB will automatically
search all channels and save them into the channel list.
Once finished, your box is ready to be used.
• Select Channel Search in the Installation Menu.
• Enter the PIN Code. (Factory PIN code is '0000')
• Select the television service you want to search by
pressing the UP/DOWN buttons and the OK button. A tick
will be shown beside your selection. You may select more
than one television service to manual tune.
• Press GREEN (Manual) button and the STB will begin to
search all channels you have chosen and save them into
the channel list.
- 15 -
Digital Terrestrial Receiver