Setting up Your System
Automatic Channel Search for Television Services(1st Step)
You can automatically detect and save all channels as follows:
System Connection
Power On
Manual Channel Search
You can automatically search and save all channels as follows :
Main Menu/Installation
Channel Search / Manual
SDB420
• Connect STB as per pages 10 to 12 (as applicable).
• Turn on the power of STB and other devices
connected to the STB.
• Press RED (SUB.T) button and the STB will
automatically search all channels and save them
into the channel list. Once finished, your box is
ready to be used.
• Select Channel Search in the Installation Menu.
• Enter the PIN Code. (Factory PIN code is '0000')
• Select the television service you want to search by
pressing the UP/DOWN buttons and the OK button.
A tick will be shown beside your selection. You may
select more than one television service to manual
tune.
• Press GREEN (Manual) button and the STB will
begin to search all channels you have chosen and
save them into the channel list.
- 15 -
Digital Terrestrial Receiver