Performing The Configuration Using The Printer's Control Panel (When You First Set It Up) - Canon LBP7780CX User Manual

07YL-081
Performing the Configuration Using the Printer's Control Panel (When
You First Set it Up)
When configuring the startup waiting time using the printer's control panel, use the following menu hierarchy.
Pressing [ ] (
indicates that the procedure is performed by pressing [
indicates that the procedure is performed by pressing [OK] on the control panel.
IMPORTANT
After performing the configuration
To enable the settings, perform a hard reset or restart the printer.
For details on a hard reset, see
To go back up the hierarchy
Press [ ] (
About the control panel
For details on the control panel, see
1
Press [ ] ( : Settings), select [Network] using [
When the message is displayed, press [OK].
You can specify the settings when the printer is either online (the
(Online) indicator is off).
2
Select [Network Delay Time] using [
3
Specify the setting for startup waiting time using [
Set a delay of between 0 and 300 seconds from the time the printer is turned ON until it begins communicating.
4
Perform a hard reset or restart the printer.
: Settings) displays the common Setup menu.
"Canceling All the Jobs (Hard
: Back).
"Control
] and [
] or [
Reset)."
Panel."
] and [
], and then press [OK].
] and [
] on the control panel.
], and then press [OK].
(Online) indicator is on) or offline (the
], and then press [OK].