Utility Menu] Menu - Canon LBP7780CX User Manual

Hide thumbs Also See for LBP7780CX:
Table of Contents

Advertisement

07YL-0U8

[Utility Menu] Menu

NOTE
About samples
For Configuration Page, Network Status Print, and Printing Position Adjustment Print, see the following.
"The Lists Common to All the Settings in the Print Mode"
Setting Item
[Check Counter]
[Configuration Page]
[Network Status
Print]
[IPSec Policy List]
[Calibration]
[PCL Utility]
[PS Utility]
[Cleaning]
[E-Mail Print Utility]
[Printing Pos. Print]
[Page Count List]
[Counter Report]
[Print MEAP Sys.
Info]
[Serial Number]
Setting Value
[113: Total (Black/S)],
[123:Total(Full+1C/S)]
-
-
-
[Color Mismatch Corr.],
[Density Control], [Density
Median Cont.], [Full
Calibration]
[Font List]
[Configuration Page], [Font
List]
[A4], [LTR]
[Received E-Mails],
[Received E-mail List]
-
-
-
-
(Display only)
Check the number of pages printed for each counter selected.
Each counter shows the number of pages printed of the
following.
[113: Total (Black/S)]: Number of single-sided pages printed
in black and white
[123:Total(Full+1C/S)]: Number of single-sided pages printed
in color
"Checking the Number of the Printed Pages"
Prints the capacity of the built-in memory (RAM) or the
contents specified in the common [Setup] menu. You can
select this item regardless of the setting for the print mode.
Prints the version number and the settings of the print server
equipped with this printer.
Print the IPSec policy that is registered in the printer.
Run each type of calibration.
"Adjusting the Color or Color Mismatch (Calibration)"
A list of the fonts that can be used in the PCL mode is printed.
[Configuration Page]
Prints the content specified in the [PS] options.
[Font List]
A list of the fonts that can be used in the PS mode is
printed.
The printer cleans the fixing roller by printing a cleaning paper.
"Cleaning the Fixing Roller of the Printer"
Manage e-mail printing.
"Receiving E-mail Data on the Mail Server and Printing
(E-mail Print)"
The printing position adjusted in [Adj. Start Position] is printed.
Check the printout results to confirm the setting for [Adj. Start
Position].
"Adjusting the Printing Position for Each Paper Source"
If department ID management is set, print an aggregate report
of the number of pages printed by each department.
Print an aggregate report of the number of pages printed for
each counter.
"Checking the Number of the Printed Pages"
Print information about applications installed on MEAP and
parts of the system applications.
Displays the serial number of the printer.
Setting

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents