Canon LBP7780CX User Manual page 127

If <Formatting SD Card?> does not appear in the display
Perform [Format] in [SD Card Maintenance] in the common Setup menu.
"[Setup] Menu ([User Maintenance] Options)"
6
Connect all the interface cables.
NOTE
Setting after the SD card is installed
Perform the following procedure after the SD card is installed.
(1) Display the [Device Settings] tab in the printer driver.
For details on the procedure for displaying the sheet, see
(2) Click [Get Device Status].
If you cannot obtain the status of the optional accessories automatically, select the [SD Card Installed] check
box.
For details on the procedure for Macintosh, see
Next, perform the following procedures.
If you install the printer and SD card at the same time
Connect the power
1
cord.
Specifying the
printer's initial
settings.
2
Specifying a type of
printer driver.
3
Load paper.
Connecting to a
4
computer.
Install the printer
5
driver.
Check the printing
6
operation.
Checking the ROM
Installation.
(Only when installing
7 ROM)
Checking the SD
Card Installation.
"Setting the Printer
"Connecting the Power Cord"
"Turning the Power On and Specifying a Language"
"Specifying a Type of Printer Driver"
"Loading Paper in the Paper Drawer"
"Loading Paper in the Multi-purpose Tray"
"Connecting to a Computer"
"For Windows"
"For Macintosh"
Check the operations by Test Page in Windows.
"Basic Operations/Various Information for Windows"
"Checking the ROM Installation"
"Checking the SD Card Installation"
"Setting the Printer Options."
Options."