A Message Appears In The Control Panel - Canon LBP7780CX User Manual

07YL-0KA

A Message Appears in the Control Panel

If an error is occurring for some reason during printing, a message appears in the display of the control panel. Perform
solutions according to the displayed message.
Service call message
Warning message
Error message
Mark
<Auto Error Skip>
NOTE
If multiple warning states are occurring at the same time
Warning messages are displayed alternately.
If an error state and warning state are occurring at the same time
A warning message is not displayed.
If a toner-related message appears
On how to act if a toner-related message such as <Toner cartridge will soon reach end of lifetime.> or <1G Change toner
cartridge recommended.> appears, see
It is an error state in which the printer cannot print.
It is a warning state in which the printer can print, but some solution is required.
Depending on the message type, the message does not appear if [Show
Warnings] is set to [Off].
"[Setup] Menu ([Control Menu] Options)"
It is an error state in which the printer cannot print.
For a message with this mark, perform the following procedure according to the situation.
When you want to skip an error (error skip) and continue to print
1. Press [
] (
2. If print data is missing or is not printed properly, print again.
If [Auto Continue] is set to [On], you can skip the error automatically.
"[Setup] Menu ([Control Menu]
If you want to cancel a job
1. Perform a soft reset.
"Canceling the Process Currently Being Performed (Soft Reset)"
2. Solve the problem according to the displayed message (this item).
3. Press [
] (
"Toner Cartridge
Description
: Online) to skip the error. (Printing is continued.)
Options)"
: Online) and print again.
Replacement."