Data Is Not Printed In The Correct Color (Specified Color) Due To Color Mismatch - Canon LBP7780CX User Manual

07YL-0S5
Data Is Not Printed in the Correct Color (Specified Color) Due to Color
Mismatch
Perform one of the following solutions according to the cause.
<Cause 1> The toner cartridges are not installed properly.
Check the installation status of the toner cartridges.
Solution
"Replacing Toner Cartridges"
<Cause 2> Any of the four color toner cartridges is almost out of toner, or the drum in any of
the toner cartridges has deteriorated.
Check the installation status of the toner cartridges.
Solution 1
"Replacing Toner Cartridges"
Correct the color mismatch.
Solution 2
"Adjusting the Color or Color Mismatch (Calibration)"
Check the status of the toner cartridges.
Replace the toner cartridge that is almost empty with a new one.
Solution 3
"Remote UI"
"Toner Cartridge Replacement"
<Cause 3> Appropriate paper is not being used.
Replace the paper with that which can be used with this printer.
Solution
"Usable Paper"
<Cause 4> Data was sent before completing calibration or when the printer was turned ON.
Make sure that calibration is completed before sending data to the printer.
Solution
<About Color Mismatch>
Laser printers are manufactured with technology of high precision. A color mismatch may be slightly conspicuous
depending on the print image. Please note that this is due to the structure of laser printers and is not a printer malfunction.
You can specify whether or not to perform calibration when turning the printer ON.
"Adjusting the Color or Color Mismatch (Calibration)"