Cleaning The Machine; Cleaning The Exterior; Cleaning The Document Cover And Document Glass - Fuji Xerox ApeosPort-II C7500 Administrator's Manual

Hide thumbs Also See for ApeosPort-II C7500:
Table of Contents

Advertisement

Cleaning the Machine

The following describes how to clean the machine.
The cleaning instructions will be explained individually for various parts of the machine:
the machine exterior, document cover/document glass, film/constant velocity transport
glass, and document feeder roller.
WARNING
When cleaning this product, use the designated cleaning materials exclusive to it.
Other cleaning materials may result in poor performance of the product. Never use
aerosol cleaners, or it may catch fire and cause explosion.
CAUTION
When cleaning this product, always switch off and unplug it. Access to a live machine
interior may cause electric shock.

Cleaning the Exterior

The following describes how to clean the exterior of the machine.
Important • Always switch the power off and unplug the power cord before cleaning any part of the
1
Wipe the exterior with a firmly
wrung soft cloth moistened with
water.
Important • Do not use cleaning agents
Note
2
Wipe off any excess water with a soft cloth.

Cleaning the Document Cover and Document Glass

If the document cover and document glass are dirty, streaks or smears may appear on
copies and the machine may not properly detect document sizes.
To ensure clean copies at all times, clean the document cover and the document roller
about once a month.
Important • Do not use benzene, paint thinner, or other organic solvents. Doing so might damage paint
machine. Cleaning the machine with the power on may cause an electric shock.
• Do not use benzene, paint thinner, or other volatile liquids or spray insect repellent on the
machine as they might discolor, deform, or crack covers.
• Cleaning the machine with an excessive amount of water may cause the machine to
malfunction or damage documents during copying.
other than water or neutral
detergent.
• If dirt does not come off easily,
gently wipe it with a soft cloth
moistened with a small
amount of neutral detergent.
or coating on plastic parts.
• Cleaning the machine with an excessive amount of water may cause the machine to
malfunction or damage documents during copying.

Cleaning the Machine

63
3

Advertisement

Table of Contents
loading

Table of Contents