Web Applications Settings For Apeosport Series Models Only; Server Setup - Fuji Xerox ApeosPort-II C7500 Administrator's Manual

6 System Settings

Web Applications Settings for ApeosPort Series Models Only

[Web Applications Settings] allows you to specify the remote access destination.
Remote access allows you to view web application services, which are compatible with
the machine, directly on the control panel, to upload a document that has been scanned
on the machine to the web applications, and to directly select and print a document
which is stored in the remote server. It also allows you to directly upload and print a file
without going through another computer.
Note
The following shows the reference section for each item.
1
On the [System Settings] screen, select [System Settings].
For the method of displaying the [System Settings] screen, refer to "System Settings Procedure" (P.108).
2
Select [Web Applications Settings].

Server Setup

This section describes the settings up a server to access web applications.
6
1
Select [Server Setup].
2
Select an access destination you want to register, and select [Change Settings].
3
Enter the URL of the access destination, if you register an access destination in a new
entry.
URL
Enter the URL of the access destination with up to 256 characters.
The URL must include the type of the protocol used.
(Example)
http://myhost.example.com
http://192.168.1.1
https://myhost.example.com
https://192.168.1.1
4
Configure other settings as necessary.
Server Name
Enter the access destination name with up to 32 characters.
Description
Enter the description of the access destination with up to 128 characters.
Use User ID
No
186
• To use this feature, Remote Access Kit (optional) and any Fuji Xerox manufactured web
applications (can be purchased separately) are required. For details, contact Customer
Support Center.
Server Setup ..............................................................................................................................186
Configuring/Canceling the Auto Link Server...........................................................................187
- When [Login Setup/Auditron Mode] is set to [Remote Access]:
The machine accesses the remote service using the user information authenticated on the
machine.
- When [Login Setup/Auditron Mode] is set to [Off], [Local Machine Access], or [Network
Access]:
Users are prompted to enter their user ID and password each time the machine accesses
the remote service.