Fuji Xerox ApeosPort-II C7500 Administrator's Manual page 215

3
Set an IP address.
If an IP address is already set, this step is not necessary. Also, in an environment with
DHCP or BOOTP, configure the way to obtain an IP address. Either the address
cannot be obtained automatically or manual configuration is preferred, configure an IP
address, a subnet mask, and a gateway address.
For information on how to set an IP address, refer to "Starting CentreWare Internet Services" (P.214).
4
Select [Close] repeatedly until the [System Settings] screen is displayed.
5
Select [Exit].
6
After the machine is restarted, print out a settings list to confirm that the port for
CentreWare Internet Services is enabled and TCP/IP is configured.
For information on how to print a settings list, refer to "Print Report/List" (P.97).
7
Start CentreWare Internet Services to confirm whether the machine is set to use.
For information on how to start CentreWare Internet Services, refer to "Starting CentreWare Internet
Services" (P.214).
Installation of CentreWare Internet Services
7
213