Yamaha RX-V3800 Owner's Manual page 73

Stereo/Surround
(Stereo/Surround menu)
Use this feature to select the sound field programs (see
page 45), the surround decode mode or the "STRAIGHT"
mode (see page 50), and adjust the parameters of each
program.
Selecting sound field programs and
setting the parameters by using GUI
screen
Set the operation mode selector to D AMP
1
and then press G SET MENU.
2
Press 4 k / n / l / h repeatedly to select
"Stereo/Surround" and then press 4 h.
3
Press 4 k / n repeatedly to select the desired
category of the programs and then press
4 h.
4
Press 4 k / n repeatedly to select the desired
programs.
5
Press 4 h on the remote control and then
4 k / n to select the desired parameter.
y
You can select "Initialize" to set all the parameters of the
selected sound field program to the default values. See
page 77 for details.
6
Press 4 h and then press 4 l / h to adjust
the selected parameter.
Press 4 ENTER or 4 k / n to confirm the
7
setting of the selected parameter.
Graphical user interface (GUI) screen
Basic configuration of sound field
programs
Each sound field program has some parameters defining
the characteristics of the program. To customize the
selected sound field program, adjust "DSP Level" and/or
"Dialogue Lift" first, and then try other parameters.
Adjusting the effect sound level of the sound
field programs (DSP Level)
Sound field programs add effect sounds (DSP effect
sounds) to the original source sound to create sound field
in the listening room. Use the "DSP Level" parameter to
adjust the level of the effect sounds.
The DSP effect
sound level is low.
Adjust "DSP Level" as follows:
Increase the value of "DSP Level" when
• the effect sound of the selected sound field
program is too weak.
• you cannot recognize any difference between the
sound field programs.
Decrease the value of "DSP Level" when
• the sound is vague.
• you feel that the additional sound effect is
excessive.
Control range: –6 dB to +3 dB
The DSP effect sound
level is high.
71
En