Table of Contents
Advertisement
Replacing the Display Assembly
WARNING:
information that shipped with your computer and follow the steps in
"Before You Begin" on page 11. For additional safety best practices
information, see the Regulatory Compliance Homepage at
dell.com/regulatory_compliance.
Procedure
1
Place the display assembly in position and replace the screws, on the display hinges,
that secure the display assembly to the computer base.
2
Place the routing guides on the computer base and replace the screw that secures
the routing guides to the computer base.
3
Route the Mini-Card antenna cables through the routing guides on the computer
base.
4
Connect the Mini-Card antenna cables to the Mini-Card. See "Replacing the Wireless
Mini-Card" on page 107.
5
Connect the display cable, video-card connector cable, and LED-logo board cable to
the respective connectors on the system board.
6
Close the display and turn the computer over.
7
Replace the screws that secure the display assembly to the computer base.
Postrequisites
1
Follow the instructions from step 3 to step 6 in Replacing the Palm Rest.
2
Replace the optical drive. See "Replacing the Optical Drive" on page 24.
3
Replace the hard drive(s). See "Replacing the Hard Drive(s)" on page 28.
4
Replace the battery pack. See "Replacing the Battery Pack" on page 17.
5
Replace the fans cover. See "Replacing the Fans Cover" on page 30.
6
Replace the base cover. See "Replacing the Base Cover" on page 15.
7
Replace any card or blank that you removed from the Media-Card Reader.
8
Follow the instructions in "After Working Inside Your Computer" on page 13.
60
|
Replacing the Display Assembly
Before working inside your computer, read the safety
UPMIDIAS
Advertisement
Table of Contents
