Table of Contents
Advertisement
Replacing the Video Card(s)
WARNING:
information that shipped with your computer and follow the steps in
"Before You Begin" on page 11. For additional safety best practices
information, see the Regulatory Compliance Homepage at
dell.com/regulatory_compliance.
Procedure
1
Insert the video card(s) at a 45-degree angle into its connector on the system board.
2
Press the other end of the video-card down into the slot on the system board and
replace the screws that secure the video-card(s) to the system board.
3
Connect the video-card connector cable to the connectors on the system board.
Postrequisites
1
Replace the display assembly. See "Replacing the Display Assembly" on page 60.
2
Replace the optical drive. See "Replacing the Optical Drive" on page 24.
3
Replace the hard drive(s). See "Replacing the Hard Drive(s)" on page 28.
4
Replace the battery pack. See "Replacing the Battery Pack" on page 17.
5
Replace the fans cover. See "Replacing the Fans Cover" on page 30.
6
Replace the base cover. See "Replacing the Base Cover" on page 15.
7
Replace any card or blank that you removed from the Media-Card Reader.
8
Follow the instructions in "After Working Inside Your Computer" on page 13.
Before working inside your computer, read the safety
UPMIDIAS
Replacing the Video Card(s)
93
|
Advertisement
Table of Contents
