Table of Contents
Advertisement
Removing the Status-Light Board
WARNING:
information that shipped with your computer and follow the steps in
"Before You Begin" on page 11. For additional safety best practices
information, see the Regulatory Compliance Homepage at
dell.com/regulatory_compliance.
Prerequisites
1
Remove any installed card or blank from the Media-Card Reader.
2
Remove the base cover. See "Removing the Base Cover" on page 14.
3
Remove the fans cover. See "Removing the Fans Cover" on page 29.
4
Remove the battery pack. See "Removing the Battery Pack" on page 16.
5
Remove the hard drive. See "Removing the Hard Drive(s)" on page 25.
6
Remove the optical drive. See "Removing the Optical Drive" on page 22.
7
Follow the instructions from step 1 to step 6 in Removing the Palm Rest.
Before working inside your computer, read the safety
UPMIDIAS
Removing the Status-Light Board
47
|
Advertisement
Table of Contents
