Removing The Display Assembly; Prerequisites; Procedure - Alienware 18 P19E Owner's Manual

Removing the Display Assembly

WARNING:
information that shipped with your computer and follow the steps in
"Before You Begin" on page 11. For additional safety best practices
information, see the Regulatory Compliance Homepage at
dell.com/regulatory_compliance.

Prerequisites

1 Remove any installed card or blank from the Media-Card Reader.
2 Remove the base cover. See "Removing the Base Cover" on page 14.
3 Remove the fans cover. See "Removing the Fans Cover" on page 29.
4 Remove the battery pack. See "Removing the Battery Pack" on page 16.
5 Remove the hard drive. See "Removing the Hard Drive(s)" on page 25.
6 Remove the optical drive. See "Removing the Optical Drive" on page 22.
7 Follow the instructions from step 1 to step 6 in Removing the Palm Rest.

Procedure

1 Close the display and turn the computer over.
2 Remove the screws that secure the display assembly to the computer base.
1
1 screws (4)
56
| Removing the Display Assembly
Before working inside your computer, read the safety
UPMIDIAS