Table of Contents
Advertisement
10. Follow the procedure in
Display assembly
Removing the display assembly
Prerequisites
1. Follow the procedure in
2. Remove the
base
cover.
3. Remove the
rear-I/O
About this task
The following image(s) indicate the location of the display assembly and provides a visual representation of the removal procedure.
Steps
1. Peel the tape securing the camera cable to the system board.
2. Disconnect the camera cable from the system board.
3. Disconnect the display cable from the system board.
After working inside your
Before working inside your
cover.
computer.
computer.
45
Advertisement
Table of Contents
