Replacing the Subwoofer
WARNING:
information that shipped with your computer and follow the steps in
"Before You Begin" on page 11. For additional safety best practices
information, see the Regulatory Compliance Homepage at
dell.com/regulatory_compliance.
Procedure
1
Align the screw holes on the subwoofer with the screw holes on the computer base.
2
Tighten the captive screws that secure the subwoofer to the computer base.
3
Route the subwoofer cable through the routing guides on the computer base and
then connect the subwoofer cable to its connector on the system board.
Postrequisites
1
Replace the speaker. See "Replacing the Speakers" on page 81.
2
Follow the instructions in "After Working Inside Your Computer" on page 13.
84
|
Replacing the Subwoofer
Before working inside your computer, read the safety
UPMIDIAS