Table of Contents
Advertisement
Replacing the Power-Button Board
WARNING:
information that shipped with your computer and follow the steps in
"Before You Begin" on page 11. For additional safety best practices
information, see the Regulatory Compliance Homepage at
dell.com/regulatory_compliance.
Procedure
1
Align the screws holes on the power-button board with the screw holes on the palm-
rest assembly.
2
Replace the screws that secure the power-button board to the palm-rest assembly.
3
Slide the power-button board cable into its connector on the status-light board, and
press down on the connector latch to secure the cable.
4
Follow the instructions from step 3 to step 6 in Replacing the Palm Rest.
Postrequisites
1
Replace the optical drive. See "Replacing the Optical Drive" on page 24.
2
Replace the hard drive(s). See "Replacing the Hard Drive(s)" on page 28.
3
Replace the battery pack. See "Replacing the Battery Pack" on page 17.
4
Replace the fans cover. See "Replacing the Fans Cover" on page 30.
5
Replace the base cover. See "Replacing the Base Cover" on page 15.
6
Replace any card or blank that you removed from the Media-Card Reader.
7
Follow the instructions in "After Working Inside Your Computer" on page 13.
46
|
Replacing the Power-Button Board
Before working inside your computer, read the safety
UPMIDIAS
Advertisement
Table of Contents
