Layout Dialog - Konica Minolta magicolor 2350 Reference Manual

Layout Dialog

Item
Pages Per
Sheet
Layout
Direction
Border
Print on Both
Sides
Binding
Save
Settings
Cancel
KONICA MINOLTA PPDs for
Macintosh
Description
Allows you to set the number of logical pages per physical
sheet.
Lets you identify either left-right or right-left logical page
direction on the physical sheet.
Allows you to select a border to surround each logical
page.
Allows you to configure the print job for duplex printing.
This setting is disabled (grayed out) unless an optional
duplex unit is installed and identified in the PPD
configuration. See "Customizing the Printer Description" on
page 64 for additional information.
Determines the orientation of the logical pages on the
physical sheet so the printed media is oriented for binding
on the short edge or long edge of the media.
Saves configuration changes made in the print dialog.
These changes remain as the default settings until the con-
figuration items are changed again.
Closes the print dialog without printing and without saving
configuration changes.
Chapter 2.6—73