Konica Minolta magicolor 2350 Reference Manual page 102

If you're using a SunOS system and don't have a directory on the system
named cdrom, type the following command to make one:
mkdir /cdrom ↵
5
Mount the CD-ROM file system:
mount -r -t hsfs device_filename /cdrom ↵
For device_filename substitute the complete pathname of the device
associated with the CD-ROM drive. On SunOS systems, device_filename
is usually /dev/sr0. If it isn't, check your SunOS system documentation.
6
Verify that the CD-ROM file system has been mounted by listing the
contents of the directory:
The directory contains several subdirectories, including UNIX.
7
Change to the directory in which you want the UNIX Host Software to be
installed.
8
Extract the files from the CD-ROM. For example:
tar xvf /cdrom/platform/unix/host_sw/hs_tar↵
The utilities are installed in a directory named KMSoft in the current
directory.
See the readme file on the CD-ROM for the exact location of this
file.
9
Unmount the CD-ROM file system:
umount device_filename↵
For device_filename, substitute the complete pathname of the device file
associated with the CD-ROM drive.
10
Change to the newly created KMSoft directory:
cd KMSoft↵
11
Run the Qinstall installation utility:
./Qinstall↵
12
Follow the instructions on the screen. When the installation is complete,
the following message displays:
KONICA MINOLTA UNIX Host Software installation
complete
13
Copy the addprt and qpr utilities and their associated manual pages to
standard directories. For example,
cp addprt /usr/bin↵
cp qpr /usr/bin↵
cp man/addprt.1 /usr/man/man1↵
cp man/qpr.1 /usr/man/man1↵
98—Chapter 2.8 Installing the UNIX Host
Software